Difference between revisions of "CTWUG Waterproofing"
From CTWUG Wiki
| (6 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | This howto was | + | This howto was compiled by Scoop. |
| + | |||
You can see the online version at http://www.scoopdistribution.co.za/wug/wug.html | You can see the online version at http://www.scoopdistribution.co.za/wug/wug.html | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | [[Image: | + | [[Image:waterproofing1.jpg|frame|1.Screw connectors together|left]] |
| − | |||
| + | [[Image:waterproofing2.jpg|frame|2.Tape over exposed areas|left]] | ||
| − | |||
| − | + | [[Image:waterproofing3.jpg|frame|3.Apply Butyl tape 5mm over each end of bottom layer|left]] | |
| − | [[Image:waterproofing4.jpg]] | + | [[Image:waterproofing4.jpg|frame|4.Tape 5mm over each end of Butyl tape|left]] |
Latest revision as of 17:09, 3 June 2009
This howto was compiled by Scoop.
You can see the online version at http://www.scoopdistribution.co.za/wug/wug.html
1.Screw connectors together
2.Tape over exposed areas
3.Apply Butyl tape 5mm over each end of bottom layer
4.Tape 5mm over each end of Butyl tape
