Difference between revisions of "CTWUG Waterproofing"

Latest revision as of 17:09, 3 June 2009

This howto was compiled by Scoop.

1.Screw connectors together

2.Tape over exposed areas

3.Apply Butyl tape 5mm over each end of bottom layer

4.Tape 5mm over each end of Butyl tape

Revision as of 15:17, 3 June 2009 (view source) Rellik (talk \| contribs) ← Older edit		Latest revision as of 17:09, 3 June 2009 (view source) Rellik (talk \| contribs)
(One intermediate revision by the same user not shown)
Line 1:		Line 1:
−	This howto was ~~compile~~ by Scoop	+	This howto was compiled by Scoop.
		+
	You can see the online version at http://www.scoopdistribution.co.za/wug/wug.html		You can see the online version at http://www.scoopdistribution.co.za/wug/wug.html