CTWUG Waterproofing
From CTWUG Wiki
Revision as of 15:11, 3 June 2009 by Rellik (talk | contribs) (New page: This howto was compile by Scoop You can see the online version at http://www.scoopdistribution.co.za/wug/wug.html 1. Screw connectors together 2. Tape over exposed areas 3. Apply Butyl ...)
This howto was compile by Scoop You can see the online version at http://www.scoopdistribution.co.za/wug/wug.html
1. Screw connectors together
2. Tape over exposed areas
3. Apply Butyl tape 5mm over each end of bottom layer
4. Tape 5mm over each end of Butyl tape