Difference between revisions of "Sneaki"

From CTWUG Wiki
Jump to: navigation, search
Line 20: Line 20:
 
===sneaki - steamer===
 
===sneaki - steamer===
 
*BB: 27dBi R52nM MikroTik radio 5.8Ghz Vertical grid
 
*BB: 27dBi R52nM MikroTik radio 5.8Ghz Vertical grid
*SSID: sneaki-steamer
+
*SSID: sneaki-steamer-bb
  
===sneaki-johnny (planned project)===
+
===sneaki-refugees(planned project)===
 
*BB: 31dBi R52Hn MikroTik radio 5.8Ghz Vertical grid
 
*BB: 31dBi R52Hn MikroTik radio 5.8Ghz Vertical grid
 
*SSID: sneaki-johnny
 
*SSID: sneaki-johnny
 +
 +
===sneaki - yeti===
 +
*BB: 24dBi R52nM Groove MikroTik radio 5.8Ghz Vertical grid
 +
*SSID: sneaki-yeti-bb
  
 
==Sector==
 
==Sector==

Revision as of 15:29, 13 May 2012

Sneaki
Sneaki1.jpg
High Site: Sneaki
SSID: http://ctwug.za.net/sneaki
WIND: Sneaki
Head Admin: Sneaki
Co Admins: theG
Location: Kensington
Back Bone Links: Steamer


Sneaki

In the beginning it was just to be connected to the CTWUG but I found this was not enough. I have learnt a lot from the CTWUG experience and would like to pass this onto other people as well. This node was setup in November 2011 with the main goal of getting more wuggers to join in the CTWUG community. Currently trying to get two backbone links running and also got a 5.8GHz sector for clients to connect to. Of course if you are thinking of connecting to this node please note the idea is to expand and create more links, hence i hope the connectees will follow course.

Check out our website http://km.ctwug.za.net (wug only access)
Planning a inet access soon.

Sneaki RB interfaces

Grid links

sneaki - steamer

  • BB: 27dBi R52nM MikroTik radio 5.8Ghz Vertical grid
  • SSID: sneaki-steamer-bb

sneaki-refugees(planned project)

  • BB: 31dBi R52Hn MikroTik radio 5.8Ghz Vertical grid
  • SSID: sneaki-johnny

sneaki - yeti

  • BB: 24dBi R52nM Groove MikroTik radio 5.8Ghz Vertical grid
  • SSID: sneaki-yeti-bb

Sector

Sneak2.jpg


Clients



IP's

IP Mask IP Range Allocated to IP Address Status
172.18.112.128 25 172.18.112.128 - 172.18.112.255 Sneaki 172.18.112.254 Reserved



IP Sub Ranges
IP Range Allocated to Network IP RB IP Broadcast IP Usable IPs Status
172.18.20.208/29 Steamer 172.18.20.208 172.18.20.214 172.18.20.215 6 Active
172.18.200.0/29 Sneaki via Steamer 172.18.200.0 172.18.200.6 172.18.200.7 6 Active
172.18.112.128/29 Loskop 172.18.112.128 172.18.112.134 172.18.112.135 6 Active
172.18.112.136/29 Unallocated 172.18.112.136 172.18.112.142 172.18.112.143 6 Available
172.18.112.144/29 Yeti 172.18.112.144 172.18.112.150 172.18.112.151 6 Active
172.18.112.152/29 Unallocated 172.18.112.152 172.18.112.158 172.18.112.159 6 Available
172.18.112.160/29 Unallocated 172.18.112.160 172.18.112.166 172.18.112.167 6 Available
172.18.112.168/29 Unallocated 172.18.112.168 172.18.112.174 172.18.112.175 6 Available
172.18.112.176/29 Unallocated 172.18.112.176 172.18.112.182 172.18.112.183 6 Available
172.18.112.184/29 Unallocated 172.18.112.184 172.18.112.190 172.18.112.191 6 Available
172.18.112.192/29 Unallocated 172.18.112.192 172.18.112.198 172.18.112.199 6 Available
172.18.112.200/29 Unallocated 172.18.112.200 172.18.112.206 172.18.112.207 6 Available
172.18.112.208/29 Unallocated 172.18.112.208 172.18.112.214 172.18.112.215 6 Available
172.18.112.216/29 Unallocated 172.18.112.216 172.18.112.222 172.18.112.223 6 Available
172.18.112.224/29 Unallocated 172.18.112.224 172.18.112.230 172.18.112.231 6 Available
172.18.112.232/29 Unallocated 172.18.112.232 172.18.112.238 172.18.112.239 6 Available
172.18.112.240/29 Unallocated 172.18.112.240 172.18.112.246 172.18.112.247 6 Available

RB Availibility

One ether ports are still open
One ethernet port is used for a groove that was recently added.

Wug Log

Aug 2011 Started the project, connected to KM Node (grid to sector)
Sep 2011 Connected to Steamer, grid to panel
Oct 2011 Added new 31 dbi grid for new backbone (testing)
Nov 2011 Added grid on steamer side, grid to grid
Dec 2011 Testing to Johnny node for new backbone
Jan 2012 Add direct current to routerboard to increase output.
Re-aligned to 31dbi grid for line of sight to Johnny
Re-aligned sector for clients to test for los.
Feb 2012 Placed N-cards in steamer gear for greater speeds.
Alignment done for Johnny or IO.
Groove added for a possible link to theG.
OSPF added as well as scripts to allow for clients to connect (not enabled yet).
March 2012 Convered with admins at km meeting and they are happy with the current backbone.
Sector will be activated and start accepting clients once the settings have been inserted.

Added Loskop as the first client to the sector.

May 2012 Connected to Yeti and completed my winch system for my mast.
Maintenance will be much easier now and the mast can stand fully above the roof.


Template:Hsnav